APFI Flare Ignition Device Connected To Mud Gas Separator for secure issue
Flare ignition device is equipped to burn on the oil and natural gas drilling field in case of flammable and poisonous gas overflow while drilling and eliminate the harm to the environment and ensure safety. It consists of a gas guiding pipe, an ignition device, a torch, and an explosion-proof hose, integrating high-pressure electronic ignition and gas combustion.
Why do we need the APFI ignitor?
The flare ignition device is used to light the waste gas in the oil and gas industry. It is connected with poor boy degasser, which separates gas from drilling mud and vent gas to flare ignition device
Burn the harmful or poisonous gas by igniter will eliminate threats to environment and safety. Every flare ignition device will be operated together with mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.
Besides traditional flare igniter, Aipu also manufactures the ignition device with a solar panel. The battery will be charged under sun energy. This is more environmental-friendly with green energy.
For each flare ignition device, we’ll configure the burner, the control panel, the joint connection, a small tank with LNG. Between the ignitor and the fuel line, there is a flame arrestor ensure the safety during ignitor operation
Main features of our flare ignitor / automatic ignition system
- High-pressure electronic ignition
- Reduce environmental impact and ensure safe
- Equipped together with mud gas separator
- Compiance with API 521
What are the types of flare ignitor?
Based on the installation way, there are vertical type and horizontal type. That means the torch port direction is parallel to the ground or normal to the ground.
Based on the fuel material, there are LNG flare ignition device or the diesel flare ignitor. Considering the power supply, there are the electrical gas flame and the solar gas flame.
There are the fixed control panel and the remote control gas flame. Besides the above division, we can customize the gas flame according to the user and the practical working condition. Such as we made the extra-high gas flame for an oil drilling company. The overall height is about 5m.
Technical specification of AIPU flare ignition device
Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details
| Model | Torch Diameter | Height | Voltage | Ignition voltage | Ignition frequency |
| APFI20/3 | DN200 | 2.5~3.0m(Customizable) | 220V | 16Kv | 100~1000times/min |
For any question or demand, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.
Product Tags:
|
|
API Flare Ignition Device Images
|
